Diffusion of Cesium Ions in Agar Gel Containing Alkali Metal Bromides

The present paper gives an account of different aspects of the tracer diffusion of Cs⁺ ions in alkali metal bromides. We have measured the diffusion coefficients, D, of cesium ions in 1% agar gel medium at 25 ^∘C using a zone-diffusion technique over a concentration range of 5 × 10⁻⁵ to 0.1 mol,dm⁻³. The values of the diffusion coefficients were found to deviate from theory, which are explained on the basis of different types of interactions occurring in the ion-gel-water system. The study is also focused on the effect of alkali metal bromides on the obstruction effect and activation energy for the tracer-diffusion of cesium ions in agar gel medium. It is observed that both parameters, extent of obstruction, ∝, and activation energy, E, decrease with increasing charge density of the cation of the supporting electrolyte. The influence of these trends is explained on the basis of competitive hydration between the ions and agar molecules, and the relative distortion in the water structure that is brought about by these different ions and agar molecules.     

基质固相分散气相色谱电子捕获检测器测定葡萄酒中5种农药残留

采用基质固相分散的样品前处理方法,替代传统的液-液萃取、固相萃取,从葡萄酒中提取、净化5种农药,气相色谱电子捕获检测器分析测定,基质匹配标准校正方法补偿基质效应。添加3水平(0.01-0.10mg/L)的回收率为85.7%-104.6%;相对标准偏差为3.6%-8.5%;检出限达到0.1-0.8μg/kg。本方法可用于葡萄酒样品中农药残留的测定。     

A critical reappraisal of recent communications on the hydrodynamic characterization of silica (aerosil) hydrosols

Different results from recent communications on the hydrodynamic characterization of ultrasonicated silica (®Aerosil) hydrosols led to a critical reappraisal of the data.It can be concluded that the degree of dispersion achievable in pyrogenic (Aerosil) hydrosols by ultrasonication is highly sensitive to the detailed parameters of the dispersion process. Characterization in terms ofabsolute numbers of a limiting particle morphology, corresponding to minima of aggregate size, porosity and number of primary particles in the aggregate is not possible.The most straightforward approach for hydrodynamic characterization seems to be a combination of sedimentation and diffusion data.Other approaches using a combination of sedimentation and viscosity data underestimate the particle dimensions. Moreover, they are quite arbitrary since the final result depends upon the proper choice between several equations for fitting the viscosity concentration dependence; the most rigorous approach seems to be an extended Einstein equation which has recently been adapted to particle aggregates.     

Dielectric analysis of polystyrene microcapsules using scanning dielectric microscope

 A dielectric imaging technique with a scanning dielectric microscope was applied to polystyrene microcapsules in an aqueous environment to study the electrical properties of individual ones. The dielectric images obtained over a frequency range from 10 kHz to 10 MHz showed frequency dependence, which indicated dielectric dispersion (or relaxation) due to interfacial polarization or the build up of charge on the boundaries between the microcapsule shell and the aqueous phases. The dielectric dispersion was analyzed based on an equivalent electrical circuit model and a shell-sphere model in which a spherical core is covered with an insulating shell. Received: 26 September 1997 Accepted: 26 December 1997     

Thermal investigation of PEG 4000 — oxazepam binary system

A thermal study using DSC and Hot Stage Microscopy (HSM) was carried out to investigate the interaction in solid state of the binary system PEG 4000 — oxazepam, and to establish their phase diagram. The eutectic composition, which melting occurs at lower temperature as compared with the pure components, has been determined. The results obtained by DSC and HSM have indicated that PEG 4000 — oxazepam mixtures displays no obvious incompatibilities, and that the system shows a typical eutectic behaviour. However because of the closeness of the melting of PEG 4000 to the eutectic temperature, it was difficult to determine precisely the eutectic composition and temperature on the basis of DSC measurements alone. The use of heats of fusion corresponding to physical mixtures allowed an estimation of the eutectic composition at 6% w/w oxazepam. Additional information of temperature (57.6C) and composition (5–10% w/w oxazepam) of the eutectic was obtained by HSM using the contact method. This low melting temperature in this range of compositions offers advantages in terms of drug stability and easy manufacture.     

Lattice dynamical study of body-centred tetragonal indium

The phonon dispersion curves, phonon frequency distribution function as well as the lattice specific heat of body-centred tetragonal indium have been deduced using a lattice dynamical model which includes central, angular and volume forces. Six elastic constants, four zone boundary frequencies and an equilibrium condition were used in the evaluation of the force constants. It is shown that this model is elastically consistent and satisfies the symmetry requirements of the lattice, the phonon frequencies of indium deduced from it are in very good agreement with the experimental values of Reichardt and Smith and the theoretical values of Garrett and Swihart, and theθ _D values compare well with the experimental values over a wide temperature range. The apparent discrepancies in the phonon dispersion curves and theθ _D-T curves obtained from deficient models, importance of umklapp processes and the significance of angular forces in the lattice dynamical models are discussed.     

TiO2-双亲共聚物复合纳米粒子的合成与紫外光敏特性

用偶联剂乙烯基三乙氧基硅烷改性纳米粒子TiO₂, 应用超声技术将TiO₂ 纳米粒子分散在甲醇介质中, 然后用苯乙烯(ST)原位聚合包封, 再用丙烯酰胺或乙烯基吡咯烷酮(VP)共聚, 两步原位分散聚合得到了有机聚合物为壳、TiO₂为核的有机/无机复合粒子. 用红外光谱、紫外-可见光谱、透射电子显微镜等检测手段进行表征. 结果显示: 由于双亲共聚物对TiO₂纳米粒子的敏化作用, 紫外-可见光谱图上两种纳米复合粒子的最大吸收峰均有明显红移, 并且吸收光谱的范围扩大了, 其中尤以TiO₂/(PST-co-PVP)为甚. 意味着光敏化活性的提高, 特别是在可见光谱的范围内. 这种情形对宽带隙半导体材料如TiO₂纳米粒子的光催化特性是有利的, 表明这类材料的应用空间得到了拓展.     

Hexaphenylditetrels – When Longer Bonds Provide Higher Stability

We present a computational analysis of hexaphenylethane derivatives with heavier tetrels comprising the central bond. In stark contrast to parent hexaphenylethane, the heavier tetrel derivatives can readily be prepared. In order to determine the origin of their apparent thermodynamic stability against dissociation as compared to the carbon case, we employed local energy decomposition analysis (LED) and symmetry-adapted perturbation theory (SAPT) at the DLPNO-CCSD(T)/def2-TZVP and sSAPT0/def2-TZVP levels of theory. We identified London dispersion (LD) interactions as the decisive factor for the molecular stability of heavier tetrel derivatives. This stability is made possible owing to the longer (than C−C) central bonds that move the phenyl groups out of the heavily repulsive regime so they can optimally benefit from LD interactions.     

A facile approach to prepare water-soluble magnetic metal (oxide) frameworks based on Na,Ca alginate and maghemite

1. Download : Download high-res image (135KB)
2. Download : Download full-size image

     

Thermoresponsive poly(ionic liquid): Controllable RAFT synthesis,thermoresponse, and application in dispersion RAFT polymerization

The thermoresponsive poly(ionic liquid) of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate] trithiocarbonate (P[VBMI][BF₄]‐TTC) showing the soluble‐to‐insoluble phase transition in the methanol/water mixture at the upper critical solution temperature (UCST) was synthesized by solution RAFT polymerization and the synthesized P[VBMI][BF₄]‐TTC was employed as macro‐RAFT agent to mediate the RAFT polymerization under dispersion condition to afford the thermoresponsive diblock copolymer nanoparticles of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate]‐b‐polystyrene (P[VBMI][BF₄]‐b‐PS). The controllable solution RAFT polymerization was achieved as indicated by the linearly increasing polymer molecular weight with the monomer conversion and the narrow molecular weight distribution. The P[VBMI][BF₄]‐TTC macro‐RAFT agent mediated dispersion polymerization afforded the P[VBMI][BF₄]‐b‐PS nanoparticles, the size of which was uncorrelated with the polymerization degree of the P[VBMI][BF₄] block. Several parameters including the polymerization degree, the polymer concentration and the water content in the solvent of the methanol/water mixture were found to be correlated with the UCST of the poly(ionic liquid). The synthesized poly(ionic liquid) is believed to be a new thermos‐responsive polymer and will be useful in material science. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 945–954